Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
9,479 Commits 71 Branches 509 Tags 714 MiB
Commit Graph

127 Commits

Author SHA1 Message Date
Andrew Tridgell e6af7dad3d Plane: switched to L3G4200D driver for Linux 2013-10-08 11:50:54 +11:00
Randy Mackay c64d444b5a Plane: integrate BattMonitor 2013-10-03 11:16:08 +09:00
Andrew Tridgell 444d053dc2 Plane: enable Oilpan and BMP085 on Linux 2013-09-29 01:02:05 +10:00
Andrew Tridgell 287db19119 Plane: updates for Stub -> HIL 2013-09-28 22:04:15 +10:00
Andrew Tridgell c3d0b315cf Plane: added HAL_LINUX includes 2013-09-28 21:24:02 +10:00
Mike McCauley 18c6b00b5b Plane: Added definitions for Flymaple 2013-09-24 13:51:28 +10:00
Andrew Tridgell 21a4da0d29 Plane: removed flash_leds() calls 2013-09-19 18:38:28 +10:00
Andrew Tridgell 4bd6b2f428 Plane: use new usb_connected() function 2013-09-19 16:23:58 +10:00
Andrew Tridgell b16e3e4c85 Plane: changed FBW min to 9 m/s 
6 m/s is too dangerous for widely used planes
 2013-08-18 11:42:23 +10:00
Andrew Tridgell 5cfdf52381 Plane: change default modes to FBWA not STABILIZE 2013-08-13 13:42:27 +10:00
Andrew Tridgell c083c15240 Plane: use a larger serial buffer 
this makes higher rate MAVLink possible again
 2013-08-02 18:46:54 +10:00
Andrew Tridgell b8fa83ff54 Plane: change default slewrate to 100%/second 2013-07-22 12:50:02 +10:00
Andrew Tridgell c8a83e17d0 Plane: remove old AIR_START code 
this was never used or tested
 2013-07-22 12:50:01 +10:00
Andrew Tridgell 4087fde140 Plane: enable CTUN log message by default 2013-07-14 21:10:12 +10:00
Andrew Tridgell 3c177867a4 Plane: allow enable/disable of camera log messages in CLI 2013-07-10 12:23:36 +10:00
Paul Riseborough d62636d309 Plane: added new TECS altitude controller 
Includes improvements to takeoff/launch detect logic to support hand
launching for X-8 flight
 2013-07-04 16:56:57 +10:00
Andrew Tridgell f7697574db Plane: use the new airspeed driver interface 
the choice of analog source is now in the airspeed driver
 2013-06-03 11:51:09 +10:00
Andrew Tridgell dd633fcf3f Plane: make voltage and battery capacity failsafe settable at runtime 
this also fixes issue #292
 2013-05-22 20:33:57 +10:00
Andrew Tridgell 001d18b51d Plane: removed scaling of pitot source 2013-05-13 15:19:05 +10:00
Andrew Tridgell 9c6f80c42b Plane: moved some default values to Parameters.pde 2013-05-05 21:51:09 +10:00
Andrew Tridgell 4e2b88f6e6 Plane: added ATT_CONTROLLER option to select attitude controller 
set to 1 for the new APM_Control library
 2013-05-05 21:51:09 +10:00
Andrew Tridgell 0d97f417ec Plane: enable compass on all boards by default 
if not present, then mag init will fail and it will disable
 2013-05-02 15:01:33 +10:00
Andrew Tridgell a019e3740e Plane: updates for new compass API 2013-05-02 12:48:14 +10:00
Andrew Tridgell de3fcbc413 Plane: removed the MANUAL_LEVEL option 
levelling on every startup is far too error prone. This was just
another parameter that everyone changed.
 2013-04-29 14:19:53 +10:00
Bill Bonney 3ec891265f Plane: Enable CURRENT logging by default onto Dataflash 2013-04-21 07:24:02 +10:00
Andrew Tridgell 0c5b393919 Plane: added compass logging 2013-04-20 13:52:36 +10:00
Andrew Tridgell 11eb0cfce1 Plane: update for new AP_Navigation controller class 
this switches ArduPlane over to use the L1 navigation controller, via
a generic nav_controller object pointer.

Note that the nav_controller controls all types of navigation now,
including level flight and heading hold. This provides a cleaner
abstraction than the old method of special case navigation handling

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2013-04-12 12:48:09 +10:00
Andrew Tridgell dfb14d760b Plane: added HIL_SERVOS option 
this allows for real servo output in HIL
 2013-03-30 14:38:43 +11:00
Andrew Tridgell c989099665 Plane: enable PX4IO dual telemetry devices 2013-02-18 13:56:21 +11:00
Brandon Jones fa7839941f After Plane: cleanup driver declaration 4d9a74d, HIL_MODE_ATTITUDE with MAG_ENABLE=1 set results in continuous reboot/APM crash. Added define for AP_COMPASS_HIL when HIL_MODE_ATTITUDE is enabled. 2013-02-05 09:04:34 +11:00
Randy Mackay 7297a1ff83 Plane: renamed RAW dataflash message to IMU 2013-01-26 17:29:29 +09:00
Randy Mackay e674626fd6 Plane: rename CUR and CURR to CURRENT for logging 
Based on user complaint that log was enabled/disabled using CUR while
message that appeared in log was CURR.
 2013-01-26 17:19:42 +09:00
Andrew Tridgell 4d9a74d742 Plane: cleanup driver declaration 
remove a lot of the #if nesting
 2013-01-21 16:08:55 +11:00
Andrew Tridgell 4deee014d6 Plane: setup PX4 airspeed analog port 2013-01-21 13:56:28 +11:00
Andrew Tridgell 2e04d4827a Plane: run PX4 console at 57600 2013-01-20 22:13:21 +11:00
Andrew Tridgell f9cb9e08ae Plane: fixed orientation of PX4 compass 2013-01-17 17:23:34 +11:00
James Bielman ab37f833db MS5611: Fix CONFIG_MS5611_SERIAL definitions. 
- Make sure the values are defined as integers.  We were always using
  SPI rather than using I2C when desired.
 2013-01-09 11:19:51 -08:00
Andrew Tridgell 38f56be2c4 Plane: enable hardware sensors on PX4 2013-01-04 21:07:56 +11:00
Andrew Tridgell 9e0096ddb5 Plane: fix handling of sensors HIL startup 2013-01-04 12:34:35 +11:00
James Bielman 264db3670e AP_Baro: Add CONFIG_MS5611_SERIAL option to choose between SPI and I2C. 
- Update ArduCopter and ArduPlane modules to pass the correct serial
  driver to the MS5611 driver.
- Update barometer examples, assuming SPI.
 2013-01-03 13:48:06 -08:00
Andrew Tridgell 868269e037 Plane: switch PX4 to attitude HIL for now 
a bit easier to debug
 2013-01-03 13:38:54 +11:00
Andrew Tridgell e8075b1657 Plane: for HIL_SENSORS for PX4 for now 
until we have sensor drivers
 2013-01-03 11:03:24 +11:00
Andrew Tridgell 1a49549e3e Plane: start port of main ArduPlane code to AP_HAL_PX4 2013-01-02 14:45:08 +11:00
Andrew Tridgell b6295c12e1 Plane: fixes for new AP_Relay interface 2013-01-02 10:18:45 +11:00
Andrew Tridgell 9a2e77b797 Plane: fully disable relay and mount code on APM1-1280 
this saves some more flash space
 2012-12-20 14:53:23 +11:00
Andrew Tridgell 772f93ea10 Plane: fixed config for 1280 2012-12-20 14:53:23 +11:00
Andrew Tridgell 41272614ce Plane: simplify board config defines 2012-12-20 14:52:32 +11:00
Andrew Tridgell e82deca305 Plane: updates to support AP_HAL SITL 2012-12-20 14:51:40 +11:00
Pat Hickey f8dec9ae4a ArduPlane: fixes to use CONFIG_HAL_BOARD instead of CONFIG_APM_HARDWARE 2012-12-20 14:51:37 +11:00
Andrew Tridgell 805a340350 Plane: enable attitude and raw logging in HIL modes 2012-12-04 11:13:33 +11:00