From 9d6f9bf907696b739a8c935232b44c12395a0677 Mon Sep 17 00:00:00 2001 From: Henry Wurzburg Date: Fri, 22 Apr 2022 08:14:44 -0500 Subject: [PATCH] AP_AdvancedFailsafe: add note to desc's on how to determine GPIO pin numbers --- libraries/AP_AdvancedFailsafe/AP_AdvancedFailsafe.cpp | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/libraries/AP_AdvancedFailsafe/AP_AdvancedFailsafe.cpp b/libraries/AP_AdvancedFailsafe/AP_AdvancedFailsafe.cpp index 5004afa0ae..71f0a7ead0 100644 --- a/libraries/AP_AdvancedFailsafe/AP_AdvancedFailsafe.cpp +++ b/libraries/AP_AdvancedFailsafe/AP_AdvancedFailsafe.cpp @@ -42,13 +42,13 @@ const AP_Param::GroupInfo AP_AdvancedFailsafe::var_info[] = { // @Param: MAN_PIN // @DisplayName: Manual Pin - // @Description: This sets a digital output pin to set high when in manual mode + // @Description: This sets a digital output pin to set high when in manual mode. See the Wiki's "GPIOs" page for how to determine the pin number for a given autopilot. // @User: Advanced AP_GROUPINFO("MAN_PIN", 0, AP_AdvancedFailsafe, _manual_pin, -1), // @Param: HB_PIN // @DisplayName: Heartbeat Pin - // @Description: This sets a digital output pin which is cycled at 10Hz when termination is not activated. Note that if a FS_TERM_PIN is set then the heartbeat pin will continue to cycle at 10Hz when termination is activated, to allow the termination board to distinguish between autopilot crash and termination. + // @Description: This sets a digital output pin which is cycled at 10Hz when termination is not activated. Note that if a FS_TERM_PIN is set then the heartbeat pin will continue to cycle at 10Hz when termination is activated, to allow the termination board to distinguish between autopilot crash and termination. Some common values are given, but see the Wiki's "GPIOs" page for how to determine the pin number for a given autopilot. // @User: Advanced // @Values: -1:Disabled,49:BB Blue GP0 pin 4,50:AUXOUT1,51:AUXOUT2,52:AUXOUT3,53:AUXOUT4,54:AUXOUT5,55:AUXOUT6,57:BB Blue GP0 pin 3,113:BB Blue GP0 pin 6,116:BB Blue GP0 pin 5 AP_GROUPINFO("HB_PIN", 1, AP_AdvancedFailsafe, _heartbeat_pin, -1), @@ -79,7 +79,7 @@ const AP_Param::GroupInfo AP_AdvancedFailsafe::var_info[] = { // @Param: TERM_PIN // @DisplayName: Terminate Pin - // @Description: This sets a digital output pin to set high on flight termination + // @Description: This sets a digital output pin to set high on flight termination. Some common values are given, but see the Wiki's "GPIOs" page for how to determine the pin number for a given autopilot. // @User: Advanced // @Values: -1:Disabled,49:BB Blue GP0 pin 4,50:AUXOUT1,51:AUXOUT2,52:AUXOUT3,53:AUXOUT4,54:AUXOUT5,55:AUXOUT6,57:BB Blue GP0 pin 3,113:BB Blue GP0 pin 6,116:BB Blue GP0 pin 5 AP_GROUPINFO("TERM_PIN", 7, AP_AdvancedFailsafe, _terminate_pin, -1),