diff --git a/libraries/RC_Channel/RC_Channel.cpp b/libraries/RC_Channel/RC_Channel.cpp index 522e958b67..1c5c3d4cdd 100644 --- a/libraries/RC_Channel/RC_Channel.cpp +++ b/libraries/RC_Channel/RC_Channel.cpp @@ -98,10 +98,10 @@ const AP_Param::GroupInfo RC_Channel::var_info[] = { // @Param: OPTION // @DisplayName: RC input option // @Description: Function assigned to this RC channel - // @Values{Copter}: 0:Do Nothing, 2:Flip, 3:Simple Mode, 4:RTL, 5:Save Trim, 7:Save WP, 9:Camera Trigger, 10:RangeFinder, 11:Fence, 13:Super Simple Mode, 14:Acro Trainer, 15:Sprayer, 16:Auto, 17:AutoTune, 18:Land, 19:Gripper, 21:Parachute Enable, 22:Parachute Release, 23:Parachute 3pos, 24:Auto Mission Reset, 25:AttCon Feed Forward, 26:AttCon Accel Limits, 27:Retract Mount1, 28:Relay On/Off, 29:Landing Gear, 30:Lost Copter Sound, 31:Motor Emergency Stop, 32:Motor Interlock, 33:Brake, 34:Relay2 On/Off, 35:Relay3 On/Off, 36:Relay4 On/Off, 37:Throw, 38:ADSB Avoidance En, 39:PrecLoiter, 40:Proximity Avoidance, 41:ArmDisarm (4.1 and lower), 42:SmartRTL, 43:InvertedFlight, 44:Winch Enable, 46:RC Override Enable, 47:User Function 1, 48:User Function 2, 49:User Function 3, 52:Acro, 55:Guided, 56:Loiter, 57:Follow, 58:Clear Waypoints, 60:ZigZag, 61:ZigZag SaveWP, 62:Compass Learn, 65:GPS Disable, 66:Relay5 On/Off, 67:Relay6 On/Off, 68:Stabilize, 69:PosHold, 70:AltHold, 71:FlowHold, 72:Circle, 73:Drift, 75:SurfaceTrackingUpDown, 76:Standby Mode, 78:RunCam Control, 79:RunCam OSD Control, 80:VisOdom Align, 81:Disarm, 83:ZigZag Auto, 84:Air Mode, 85:Generator, 90:EKF Pos Source, 94:VTX Power, 99:AUTO RTL, 100:KillIMU1, 101:KillIMU2, 102:Camera Mode Toggle, 105:GPS Disable Yaw, 151:Turtle, 152:simple heading reset, 153:ArmDisarm (4.2 and higher), 154:ArmDisarm with AirMode (4.2 and higher), 158:Optflow Calibration, 159:Force Flying, 161:Turbine Start(heli), 162:FFT Tune, 163:Mount Lock, 164:Pause Stream Logging, 165:Arm/Emergency Motor Stop, 212:Mount1 Roll, 213:Mount1 Pitch, 214:Mount1 Yaw, 215:Mount2 Roll, 216:Mount2 Pitch, 217:Mount2 Yaw, 300:Scripting1, 301:Scripting2, 302:Scripting3, 303:Scripting4, 304:Scripting5, 305:Scripting6, 306:Scripting7, 307:Scripting8 - // @Values{Rover}: 0:Do Nothing, 4:RTL, 5:Save Trim (4.1 and lower), 7:Save WP, 9:Camera Trigger, 11:Fence, 16:Auto, 19:Gripper, 24:Auto Mission Reset, 27:Retract Mount1, 28:Relay On/Off, 30:Lost Rover Sound, 31:Motor Emergency Stop, 34:Relay2 On/Off, 35:Relay3 On/Off, 36:Relay4 On/Off, 40:Proximity Avoidance, 41:ArmDisarm (4.1 and lower), 42:SmartRTL, 46:RC Override Enable, 50:LearnCruise, 51:Manual, 52:Acro, 53:Steering, 54:Hold, 55:Guided, 56:Loiter, 57:Follow, 58:Clear Waypoints, 59:Simple Mode, 62:Compass Learn, 63:Sailboat Tack, 65:GPS Disable, 66:Relay5 On/Off, 67:Relay6 On/Off, 74:Sailboat motoring 3pos, 78:RunCam Control, 79:RunCam OSD Control, 80:Viso Align, 81:Disarm, 90:EKF Pos Source, 94:VTX Power, 97:Windvane home heading direction offset, 100:KillIMU1, 101:KillIMU2, 102:Camera Mode Toggle, 105:GPS Disable Yaw, 106:Disable Airspeed Use, 153:ArmDisarm (4.2 and higher), 155: set steering trim to current servo and RC, 156:Torqeedo Clear Err, 162:FFT Tune, 163:Mount Lock, 164:Pause Stream Logging, 165:Arm/Emergency Motor Stop, 201:Roll, 202:Pitch, 207:MainSail, 208:Flap, 211:Walking Height, 212:Mount1 Roll, 213:Mount1 Pitch, 214:Mount1 Yaw, 215:Mount2 Roll, 216:Mount2 Pitch, 217:Mount2 Yaw, 300:Scripting1, 301:Scripting2, 302:Scripting3, 303:Scripting4, 304:Scripting5, 305:Scripting6, 306:Scripting7, 307:Scripting8 - // @Values{Plane}: 0:Do Nothing, 4:ModeRTL, 9:Camera Trigger, 11:Fence, 16:ModeAuto, 22:Parachute Release, 24:Auto Mission Reset, 27:Retract Mount1, 28:Relay On/Off, 29:Landing Gear, 30:Lost Plane Sound, 31:Motor Emergency Stop, 34:Relay2 On/Off, 35:Relay3 On/Off, 36:Relay4 On/Off, 38:ADSB Avoidance En, 41:ArmDisarm (4.1 and lower), 43:InvertedFlight, 46:RC Override Enable, 51:ModeManual, 52: ModeACRO, 55:ModeGuided, 56:ModeLoiter, 58:Clear Waypoints, 62:Compass Learn, 64:Reverse Throttle, 65:GPS Disable, 66:Relay5 On/Off, 67:Relay6 On/Off, 72:ModeCircle, 77:ModeTakeoff, 78:RunCam Control, 79:RunCam OSD Control, 81:Disarm, 82:QAssist 3pos, 84:Air Mode, 85:Generator, 86: Non Auto Terrain Follow Disable, 87:Crow Select, 88:Soaring Enable, 89:Landing Flare, 90:EKF Pos Source, 91:Airspeed Ratio Calibration, 92:FBWA, 94:VTX Power, 95:FBWA taildragger takeoff mode, 96:trigger re-reading of mode switch, 98: ModeTraining, 100:KillIMU1, 101:KillIMU2, 102:Camera Mode Toggle, 105:GPS Disable Yaw, 106:Disable Airspeed Use, 107: EnableFixedWingAutotune, 108: ModeQRTL, 150: CRUISE, 153:ArmDisarm (4.2 and higher), 154:ArmDisarm with Quadplane AirMode (4.2 and higher), 155: set roll pitch and yaw trim to current servo and RC, 157: Force FS Action to FBWA, 158:Optflow Calibration, 160:Weathervane Enable, 162:FFT Tune, 163:Mount Lock, 164:Pause Stream Logging, 165:Arm/Emergency Motor Stop, 208:Flap, 209: Forward Throttle, 210: Airbrakes, 212:Mount1 Roll, 213:Mount1 Pitch, 214:Mount1 Yaw, 215:Mount2 Roll, 216:Mount2 Pitch, 217:Mount2 Yaw, 300:Scripting1, 301:Scripting2, 302:Scripting3, 303:Scripting4, 304:Scripting5, 305:Scripting6, 306:Scripting7, 307:Scripting8 - // @Values{Blimp}: 0:Do Nothing, 18:Land, 46:RC Override Enable, 65:GPS Disable, 81:Disarm, 90:EKF Pos Source, 100:KillIMU1, 101:KillIMU2, 153:ArmDisarm, 164:Pause Stream Logging + // @Values{Copter}: 0:Do Nothing, 2:Flip, 3:Simple Mode, 4:RTL, 5:Save Trim, 7:Save WP, 9:Camera Trigger, 10:RangeFinder, 11:Fence, 13:Super Simple Mode, 14:Acro Trainer, 15:Sprayer, 16:Auto, 17:AutoTune, 18:Land, 19:Gripper, 21:Parachute Enable, 22:Parachute Release, 23:Parachute 3pos, 24:Auto Mission Reset, 25:AttCon Feed Forward, 26:AttCon Accel Limits, 27:Retract Mount1, 28:Relay On/Off, 29:Landing Gear, 30:Lost Copter Sound, 31:Motor Emergency Stop, 32:Motor Interlock, 33:Brake, 34:Relay2 On/Off, 35:Relay3 On/Off, 36:Relay4 On/Off, 37:Throw, 38:ADSB Avoidance En, 39:PrecLoiter, 40:Proximity Avoidance, 41:ArmDisarm (4.1 and lower), 42:SmartRTL, 43:InvertedFlight, 44:Winch Enable, 46:RC Override Enable, 47:User Function 1, 48:User Function 2, 49:User Function 3, 52:Acro, 55:Guided, 56:Loiter, 57:Follow, 58:Clear Waypoints, 60:ZigZag, 61:ZigZag SaveWP, 62:Compass Learn, 65:GPS Disable, 66:Relay5 On/Off, 67:Relay6 On/Off, 68:Stabilize, 69:PosHold, 70:AltHold, 71:FlowHold, 72:Circle, 73:Drift, 75:SurfaceTrackingUpDown, 76:Standby Mode, 78:RunCam Control, 79:RunCam OSD Control, 80:VisOdom Align, 81:Disarm, 83:ZigZag Auto, 84:Air Mode, 85:Generator, 90:EKF Pos Source, 94:VTX Power, 99:AUTO RTL, 100:KillIMU1, 101:KillIMU2, 102:Camera Mode Toggle, 105:GPS Disable Yaw, 151:Turtle, 152:simple heading reset, 153:ArmDisarm (4.2 and higher), 154:ArmDisarm with AirMode (4.2 and higher), 158:Optflow Calibration, 159:Force Flying, 161:Turbine Start(heli), 162:FFT Tune, 163:Mount Lock, 164:Pause Stream Logging, 165:Arm/Emergency Motor Stop, 166:Camera Record Video, 167:Camera Zoom, 168:Camera Manual Focus, 169:Camera Auto Focus, 212:Mount1 Roll, 213:Mount1 Pitch, 214:Mount1 Yaw, 215:Mount2 Roll, 216:Mount2 Pitch, 217:Mount2 Yaw, 300:Scripting1, 301:Scripting2, 302:Scripting3, 303:Scripting4, 304:Scripting5, 305:Scripting6, 306:Scripting7, 307:Scripting8 + // @Values{Rover}: 0:Do Nothing, 4:RTL, 5:Save Trim (4.1 and lower), 7:Save WP, 9:Camera Trigger, 11:Fence, 16:Auto, 19:Gripper, 24:Auto Mission Reset, 27:Retract Mount1, 28:Relay On/Off, 30:Lost Rover Sound, 31:Motor Emergency Stop, 34:Relay2 On/Off, 35:Relay3 On/Off, 36:Relay4 On/Off, 40:Proximity Avoidance, 41:ArmDisarm (4.1 and lower), 42:SmartRTL, 46:RC Override Enable, 50:LearnCruise, 51:Manual, 52:Acro, 53:Steering, 54:Hold, 55:Guided, 56:Loiter, 57:Follow, 58:Clear Waypoints, 59:Simple Mode, 62:Compass Learn, 63:Sailboat Tack, 65:GPS Disable, 66:Relay5 On/Off, 67:Relay6 On/Off, 74:Sailboat motoring 3pos, 78:RunCam Control, 79:RunCam OSD Control, 80:Viso Align, 81:Disarm, 90:EKF Pos Source, 94:VTX Power, 97:Windvane home heading direction offset, 100:KillIMU1, 101:KillIMU2, 102:Camera Mode Toggle, 105:GPS Disable Yaw, 106:Disable Airspeed Use, 153:ArmDisarm (4.2 and higher), 155: set steering trim to current servo and RC, 156:Torqeedo Clear Err, 162:FFT Tune, 163:Mount Lock, 164:Pause Stream Logging, 165:Arm/Emergency Motor Stop, 166:Camera Record Video, 167:Camera Zoom, 168:Camera Manual Focus, 169:Camera Auto Focus, 201:Roll, 202:Pitch, 207:MainSail, 208:Flap, 211:Walking Height, 212:Mount1 Roll, 213:Mount1 Pitch, 214:Mount1 Yaw, 215:Mount2 Roll, 216:Mount2 Pitch, 217:Mount2 Yaw, 300:Scripting1, 301:Scripting2, 302:Scripting3, 303:Scripting4, 304:Scripting5, 305:Scripting6, 306:Scripting7, 307:Scripting8 + // @Values{Plane}: 0:Do Nothing, 4:ModeRTL, 9:Camera Trigger, 11:Fence, 16:ModeAuto, 22:Parachute Release, 24:Auto Mission Reset, 27:Retract Mount1, 28:Relay On/Off, 29:Landing Gear, 30:Lost Plane Sound, 31:Motor Emergency Stop, 34:Relay2 On/Off, 35:Relay3 On/Off, 36:Relay4 On/Off, 38:ADSB Avoidance En, 41:ArmDisarm (4.1 and lower), 43:InvertedFlight, 46:RC Override Enable, 51:ModeManual, 52: ModeACRO, 55:ModeGuided, 56:ModeLoiter, 58:Clear Waypoints, 62:Compass Learn, 64:Reverse Throttle, 65:GPS Disable, 66:Relay5 On/Off, 67:Relay6 On/Off, 72:ModeCircle, 77:ModeTakeoff, 78:RunCam Control, 79:RunCam OSD Control, 81:Disarm, 82:QAssist 3pos, 84:Air Mode, 85:Generator, 86: Non Auto Terrain Follow Disable, 87:Crow Select, 88:Soaring Enable, 89:Landing Flare, 90:EKF Pos Source, 91:Airspeed Ratio Calibration, 92:FBWA, 94:VTX Power, 95:FBWA taildragger takeoff mode, 96:trigger re-reading of mode switch, 98: ModeTraining, 100:KillIMU1, 101:KillIMU2, 102:Camera Mode Toggle, 105:GPS Disable Yaw, 106:Disable Airspeed Use, 107: EnableFixedWingAutotune, 108: ModeQRTL, 150: CRUISE, 153:ArmDisarm (4.2 and higher), 154:ArmDisarm with Quadplane AirMode (4.2 and higher), 155: set roll pitch and yaw trim to current servo and RC, 157: Force FS Action to FBWA, 158:Optflow Calibration, 160:Weathervane Enable, 162:FFT Tune, 163:Mount Lock, 164:Pause Stream Logging, 165:Arm/Emergency Motor Stop, 166:Camera Record Video, 167:Camera Zoom, 168:Camera Manual Focus, 169:Camera Auto Focus, 208:Flap, 209: Forward Throttle, 210: Airbrakes, 212:Mount1 Roll, 213:Mount1 Pitch, 214:Mount1 Yaw, 215:Mount2 Roll, 216:Mount2 Pitch, 217:Mount2 Yaw, 300:Scripting1, 301:Scripting2, 302:Scripting3, 303:Scripting4, 304:Scripting5, 305:Scripting6, 306:Scripting7, 307:Scripting8 + // @Values{Blimp}: 0:Do Nothing, 18:Land, 46:RC Override Enable, 65:GPS Disable, 81:Disarm, 90:EKF Pos Source, 100:KillIMU1, 101:KillIMU2, 153:ArmDisarm, 164:Pause Stream Logging, 166:Camera Record Video, 167:Camera Zoom, 168:Camera Manual Focus, 169:Camera Auto Focus // @User: Standard AP_GROUPINFO_FRAME("OPTION", 6, RC_Channel, option, 0, AP_PARAM_FRAME_COPTER|AP_PARAM_FRAME_ROVER|AP_PARAM_FRAME_PLANE|AP_PARAM_FRAME_BLIMP), @@ -532,7 +532,10 @@ void RC_Channel::init_aux_function(const aux_func_t ch_option, const AuxSwitchPo #endif case AUX_FUNC::LOG_PAUSE: case AUX_FUNC::ARM_EMERGENCY_STOP: - + case AUX_FUNC::CAMERA_REC_VIDEO: + case AUX_FUNC::CAMERA_ZOOM: + case AUX_FUNC::CAMERA_MANUAL_FOCUS: + case AUX_FUNC::CAMERA_AUTO_FOCUS: run_aux_function(ch_option, ch_flag, AuxFuncTriggerSource::INIT); break; default: @@ -594,6 +597,10 @@ const RC_Channel::LookupTable RC_Channel::lookuptable[] = { { AUX_FUNC::FFT_NOTCH_TUNE, "FFT Notch Tuning"}, { AUX_FUNC::MOUNT_LOCK, "MountLock"}, { AUX_FUNC::LOG_PAUSE, "Pause Stream Logging"}, + { AUX_FUNC::CAMERA_REC_VIDEO, "Camera Record Video"}, + { AUX_FUNC::CAMERA_ZOOM, "Camera Zoom"}, + { AUX_FUNC::CAMERA_MANUAL_FOCUS, "Camera Manual Focus"}, + { AUX_FUNC::CAMERA_AUTO_FOCUS, "Camera Auto Focus"}, }; /* lookup the announcement for switch change */ @@ -742,6 +749,71 @@ void RC_Channel::do_aux_function_camera_trigger(const AuxSwitchPos ch_flag) } } +bool RC_Channel::do_aux_function_record_video(const AuxSwitchPos ch_flag) +{ + AP_Camera *camera = AP::camera(); + if (camera == nullptr) { + return false; + } + return camera->record_video(ch_flag == AuxSwitchPos::HIGH); +} + +bool RC_Channel::do_aux_function_camera_zoom(const AuxSwitchPos ch_flag) +{ + AP_Camera *camera = AP::camera(); + if (camera == nullptr) { + return false; + } + int8_t zoom_step = 0; // zoom out = -1, hold = 0, zoom in = 1 + switch (ch_flag) { + case AuxSwitchPos::HIGH: + zoom_step = 1; // zoom in + break; + case AuxSwitchPos::MIDDLE: + zoom_step = 0; // zoom hold + break; + case AuxSwitchPos::LOW: + zoom_step = -1; // zoom out + break; + } + return camera->set_zoom_step(zoom_step); +} + +bool RC_Channel::do_aux_function_camera_manual_focus(const AuxSwitchPos ch_flag) +{ + AP_Camera *camera = AP::camera(); + if (camera == nullptr) { + return false; + } + int8_t focus_step = 0; // focus in = -1, focus hold = 0, focus out = 1 + switch (ch_flag) { + case AuxSwitchPos::HIGH: + // wide shot, focus out + focus_step = 1; + break; + case AuxSwitchPos::MIDDLE: + focus_step = 0; + break; + case AuxSwitchPos::LOW: + // close shot, focus in + focus_step = -1; + break; + } + return camera->set_manual_focus_step(focus_step); +} + +bool RC_Channel::do_aux_function_camera_auto_focus(const AuxSwitchPos ch_flag) +{ + AP_Camera *camera = AP::camera(); + if (camera == nullptr) { + return false; + } + if (ch_flag == AuxSwitchPos::HIGH) { + return camera->set_auto_focus(); + } + return false; +} + void RC_Channel::do_aux_function_runcam_control(const AuxSwitchPos ch_flag) { #if HAL_RUNCAM_ENABLED @@ -1199,6 +1271,17 @@ bool RC_Channel::do_aux_function(const aux_func_t ch_option, const AuxSwitchPos } break; } + case AUX_FUNC::CAMERA_REC_VIDEO: + return do_aux_function_record_video(ch_flag); + + case AUX_FUNC::CAMERA_ZOOM: + return do_aux_function_camera_zoom(ch_flag); + + case AUX_FUNC::CAMERA_MANUAL_FOCUS: + return do_aux_function_camera_manual_focus(ch_flag); + + case AUX_FUNC::CAMERA_AUTO_FOCUS: + return do_aux_function_camera_auto_focus(ch_flag); case AUX_FUNC::RETRACT_MOUNT1: { #if HAL_MOUNT_ENABLED diff --git a/libraries/RC_Channel/RC_Channel.h b/libraries/RC_Channel/RC_Channel.h index e257c0a92c..2462709663 100644 --- a/libraries/RC_Channel/RC_Channel.h +++ b/libraries/RC_Channel/RC_Channel.h @@ -231,6 +231,10 @@ public: MOUNT_LOCK = 163, // Mount yaw lock vs follow LOG_PAUSE = 164, // Pauses logging if under logging rate control ARM_EMERGENCY_STOP = 165, // ARM on high, MOTOR_ESTOP on low + CAMERA_REC_VIDEO = 166, // start recording on high, stop recording on low + CAMERA_ZOOM = 167, // camera zoom high = zoom in, middle = hold, low = zoom out + CAMERA_MANUAL_FOCUS = 168,// camera manual focus. high = long shot, middle = stop focus, low = close shot + CAMERA_AUTO_FOCUS = 169, // camera auto focus // inputs from 200 will eventually used to replace RCMAP ROLL = 201, // roll input @@ -322,6 +326,10 @@ protected: void do_aux_function_avoid_adsb(const AuxSwitchPos ch_flag); void do_aux_function_avoid_proximity(const AuxSwitchPos ch_flag); void do_aux_function_camera_trigger(const AuxSwitchPos ch_flag); + bool do_aux_function_record_video(const AuxSwitchPos ch_flag); + bool do_aux_function_camera_zoom(const AuxSwitchPos ch_flag); + bool do_aux_function_camera_manual_focus(const AuxSwitchPos ch_flag); + bool do_aux_function_camera_auto_focus(const AuxSwitchPos ch_flag); void do_aux_function_runcam_control(const AuxSwitchPos ch_flag); void do_aux_function_runcam_osd_control(const AuxSwitchPos ch_flag); void do_aux_function_fence(const AuxSwitchPos ch_flag);